FOLDING SEAT– comfortable additional seat
– space saver
– 3-way folding seat
– can be reduced to a height of 37cm
– integrated headrest
The folding seat from Aguti allows passengers to travel in safety but also folds down to fit underneath existing furniture to give further seating space when the vehicle is parked.
Supplied trimmed in Anthracite fabric as pictured. TUV approved.
AGUTI Milan– luxury captain seat
– Height and tilt adjustment
– Adjustable armrests
– Various optional extras and trim options
– integrated headrest
Aguti’s Milan captain seat is mainly used in vehicles that already have the seat belt mounted in the vehicle B-pillar.
Extra wide, height adjustable armrests, step-less backrest adjustment and anatomically adapted contact surfaces for legs and back ensure a super comfortable and relaxed sitting position.
AGUTI Milan For VW T5/T6– luxury captain seat
– Height and tilt adjustment
– Adjustable armrests
– Various optional extras and trim options
– integrated headrest
Aguti’s popular Milan seat fits the VW T5/T6 with their smooth rattle free seat swivel with integrated base.
Extra wide, height adjustable armrests, step-less backrest adjustment and anatomically adapted contact surfaces for legs and back ensure a super comfortable and relaxed sitting position.
BENCH SEAT SERIES 500– M1 approval
– 500-1200mm widths available
– adjustable backrests
– choice of coverings
The 500 series is available without seat belts, with lap belts or 3 point seat belts. M1 approval has been achieved on a 900mm wide bench, however the bench is available in widths from 500-1200mm. The 500 series is designed to be used in pairs in a dinette system in order to make a double bed. The backrest is full adjustable and the seat benefits from side runners which, when in the bed position, allows the user to make a wider bed. Available trimmed in FASP’s fabric, the customers fabric or untrimmed in kit form.
BENCH SEAT SERIES 505– M1 approved
– 2 seat bench
– Folds out to make double bed
– Fully adjustable backrest
– 3 point seatbelts
– choice of covering
The 505 series in an M1 approved 2 seat bench seat with 3 point seat belts integrates. The 505 folds out to make a double bed. The backrest is fully adjustable and the seat benefits from side runners which, when in the bed position, allows the user to make a wider bed. Available trimmed in FASP’s fabric, the customers fabric or untrimmed in kit form.
BENCH SEAT SERIES 506– M1 approved
– 2 seat bench
– Fully adjustable backrest
– Folds out to make double bed
– choice of covering
The 506 series in an M1 approved 2 seat bench seat with 3 point seat belts integrates. The 506 folds out to make a half double bed. The backrest is fully adjustable and the seat benefits from side runners which, when in the bed position, allows the user to make a wider bed. Available trimmed in FASP’s fabric, the customers fabric or untrimmed in kit form.
STANDARD SEAT SERIES 205– adjustable backrest
– series sliders
– steel-tubolar frame
– lumbar adjustment
– choice of coverings
The 205 series has been designed to give a comfortable driving position for long journeys.
STANDARD SEAT SERIES 306– steel-tubolar frame
– adjustable backrest
– anatomical filling of differentiated density and special foam in the sitting for support of the legs
– adjustable headrest
– underseat sliders
– lumbar adjustment
– choice of covering
The 306 is a high quality seat with larger dimensions to give the feel of a comfortable armchair
STANDARD SEAT SERIES 747– steel-tubolar frame
– adjustable backrest
– sliders
– choice of covering
The 747 is the most popular seat from FSAP. Options available include the 747L luxury seat with extra foam
STANDARD SEAT SERIES 748– steel-tubolar frame
– adjustable backrest
– sliders
– choice of covering
The 748 is a new seat for the 740 range offering further comfort with larger dimensions
STANDARD SEAT SERIES 855– steel-tubolar frame
– adjustable backrest
– adjustable headrest
– sliders
– choice of covering
The 855 is a large comfortable seat with a sport feel thanks to the side bolster support
STANDARD SEAT SERIES 966– steel-tubolar frame
– adjustable backrest
– adjustable headrest
– sliders
– choice of covering
This is the ideal seat for leisure vehicles. The special shape of its filling is specific to help avoid fatigue on long journeys
LUXURY SEAT SERIES 610– coating of your choice
– Sliding rails
– Frame made of tubular steel
– Adjustable backrest
– The anchor point for the original vehicle seat belt
The 610 series is a new high end seat design with options to include seat swivel, lumbar support, height adjustment and seat tilt function
LUXURY SEAT SERIES 630– coating of your choice
– Sliding rails
– Frame made of tubular steel
– Adjustable backrest
– Integrated 3 point seatbelt
– The anchor point for the original vehicle seat belt
The 630 series is the 610 series with an integrated 3 point seat belt
LUXURY SEAT SERIES 640– coating of your choice
– Sliding rails
– Frame made of tubular steel
The 640 series is a new high end seat design with a wide high back and integrates 3 point seat belt
LUXURY SEAT SERIES 630.6– coating of your choice
– Sliding rails
– Frame made of tubular steel
The 630.6 is the 630 series with a separate headrest
SEAT COVERSAvailable to fit:
- Mercedes Sprinter 2007+
- VW Crafter
- VW T5
- Ducato/Boxer/Relay 2007+
- Iveco Daily 2000+
FASP offer a range of vinyl seat covers to fit original vehicle seats. By fitting additional foam under the covered, customers are able to change the shape and design of the seat for a fraction of the cost of new seats.
Use in conjunction with FASP armrests for a complete seat overhaul.
ARMRESTSAvailable to fit:
- Mercedes Sprinter 1995-2006
- VW Crafter/Mercedes Sprinter 2007+
- Iveco Daily 2000+
- Ducato/Boxer/Relay 2002-2006
- Ducato/Boxer/Relay 2007+
- Ford Transit 2000-2011
FASP offer a range of armrests to fit original vehicle seats. By fitting armrests the seat occupier has additional support and comfort in the seat.
Use in conjunction with FASP seat covers for a complete overhaul.
SPECIALIST VEHICLE SEATING
In addition to the leisure seating range, FASP offer a variety of seating designed for the specialist vehicle industry (ambulances, fire engines etc). The seats have varied used and applications but can be adapted to suit other vehicles such as police incident response vehicles, camera vehicles, exhibition vehicles etc.
SEAT SWIVEL PLATES
FASP Seat Swivels are designed and manufactured in two different ways in order to suit the various seats of new vehicles. The 1300 style is made with sections of welded steel which gives a very strong and heavy finish. The 1305 in a much lighter design as the thinner sheet of steel is pressed in order to give strength. The 1305 also used ball bearings to aid a smooth swivel action. There are various levels of approvals that can be gained for swivels.
MACH 8 AIR CONDITIONER- Mach 8 Deluxe Unit is operated by remote control
- Independently controlled front and rear airflow dampers allow the flow of the air to be directed to the front or rear to maximise comfort
- Discrete ED indicated cooling or heating
- Manual override buttons for both heating and cooling
- Quick, easy and tool-free access to washable filters
- Neutral colour blends with decor
- Follow me temperature sensor function allows sensing and control of the temperature from the hand held remote control
- Telescoping design allows cover to ‘float’ to provide a snug no gap fit to virtually any ceiling
The revolutionary MACH 8 models have the lowest profile of any rooftop units in the industry. The industry exclusive fibreglass base pan, provides superior strength and durability while reducing weight. Available in various capacities and in Roughneck TM rough duty models. The MACH 8 out performs all competitive models by delivering more cooling at a higher rate of airflow.
DELUXE MODEL ROOF VENT- MaxxFan®, a new, one-of-a kind ventilator system that protects your motorhome/caravan interior – always – in any weather – rain or shine
- A complete all in one system that fits standard 40cm x 40cm motorhome/caravan roof openings
- Opens and closes like most standard roof vents using a manual knob located at the ceiling or opens automatically with optional Remote Control
- Includes a powerful 10-speed fan, thermostat, air intake and exhaust functions
The MaxxFan® is the only complete motorhome/caravan ventilation system that incorporates a vent, fan and rain protection in a single all-in-one-unit. The only motorhome/caravan Ventilator Fan with a Built-In Rain Cover!
SAFE SIZE 0Dimensions:
L22cm x W13cm x D13cm
Access Door: 19.4 x 10.4 cm
Weight: 4.2kg
Mounting Options:
Horizontal or vertical
4 holes in the base
2 holes in the back plate
SAFE SIZE 1Dimensions:
L22cm x W13cm x D25cm
Access Door: 19.4 x 10.4 cm
Weight: 4.6kg
Mounting Options:
Horizontal or vertical
4 holes in the base
2 holes in the back plate
SAFE SIZE 2Dimensions:
L25cm x W13cm x D33cm
Access Door: 22.4 x 10.4 cm
Weight: 8.2kg
Mounting Options:
Horizontal or vertical
4 holes in the base
2 holes in the back plate
SAFE SIZE 3Dimensions:
L25cm x W13cm x D22cm
Access Door: 22.4 x 19.4 cm
Weight: 6.5kg
Mounting Options:
Horizontal or vertical
4 holes in the base
SAFE SIZE 4- FITS 17″ NOTEBOOK/LAPTOPDimensions:
L35cm x W13cm x D46cm
Access Door: 32.4 x 10.4 cm
Weight: 13kg
Mounting Options:
Horizontal or vertical
4 holes in the base
2 holes in the back plate
SAFE SIZE 5- WITH QUICK RELEASEDimensions:
L50cm x W36cm x D18cm
Access Door: 32.4 x 10.4 cm
Weight: 19kg
Mounting Options:
Supplied as pictured with 2 mounting plates
SEAT BOX SAFE – DUCATO X244/X250Dimensions:
L28cm x W18cm x D26cm
Access Door: 25 x 15 cm
Weight: 9kg
Mounting Options:
Safe mounts between vehicle floor and seat base using existing mounting points. Single hole in base of safe for optional fixing through vehicle floor
SEAT BOX SAFE – DUCATO X250/X290Dimensions:
L28cm x W18cm x D35cm
Access Door: 25 x 15 cm
Weight: 11kg
Mounting Options:
Safe mounts between vehicle floor and seat base using existing mounting points. Single hole in base of safe for optional fixing through vehicle floor
SEAT BOX SAFE – DUCATO X250/X290- FOR LAPTOPDimensions:
L35.5cm x W18cm x D38cm
Access Door: made for 15″ laptop
Weight: 16kg
Mounting Options:
Safe mounts between vehicle floor and seat base using existing mounting points. Single hole in base of safe for optional fixing through vehicle floor
SEAT BOX SAFE – IVECO DAILYDimensions:
L23cm x W15cm x D39cm
Access Door: 20.4 x 12.4 cm
Weight: 9kg
Mounting Options:
4 holes in the base to mount to vehicle floor
SEAT BOX SAFE – VW T4 & T5Dimensions:
L25cm x W13cm x D33cm
Access Door: 22.4 x 10.4 cm
Weight: 9kg
Mounting Options:
Safe mounts between vehicle floor and seat base using existing mounting points. Can be mounted to be accessed from front or rear of seat base
SEAT BOX SAFE – VAUXHALL MONAVO/RENAULT MASTER 2010 ONWARDSDimensions:
Large Option Dimensions:
L33.5cm x W13cm x D30.5cm
Weight: 12kg
Small Option Dimensions:
L23.5cm x W13cm x D30.5cm
Weight: 9kg
Mounting Options:
As per Ducato X250 safe
SEAT SWIVEL PLATES
Sportscraft Seat Swivels use a caster system where 4 nylon wheels help distribute the weight of the seat occupant to help minimise rocking. The table shows the range of swivels available for various European vehicles.
SEAT BOX, SWIVEL & SAFE
Sportscraft produce seat swivel seat box swivel and safes exclusively for the VW market for the VW T4 (1997+) and the VW T5. The product replaces the existing original seat box with a seat box with integrates swivel and lockable safe door. The safe door turns the entire seat base into a secure storage area, whilst the integrates swivel keeps then seat height the same as the original seat box
LOWERED SEAT BOX
Produced for the Fiat Ducato and equivalent models from X230 to X290. The lowered boxes reduce the seat height so that when used in conjunction with a seat swivel the seat will sit at the original height.
BENCH FRAME
Constructed of welded sheet metal steel with an aluminium column, the seat bench with three-point seat belts is TUV approved and tested to relevant EC standards. Available in a width of 990mm to 880mm.
SEAT S5.1
S5.1 and S9.1 are the high back/integrated headrest option. Similar in design and appearance the S5.1 has a flat, long base and the S9.1 has more bolster/side support for a sportier feel.
SEAT S9.1
S5.1 and S9.1 are the high back/integrated headrest option. Similar in design and appearance the S5.1 has a flat, long base and the S9.1 has more bolster/side support for a sportier feel.
SEAT S6.1
S6.1 and S8.1 have separate headrests for the classic captain seat look. Similar in design and appearance the S6.1 has a flat, long base and the S8.1 has more bolster/side support for a sportier feel.
SEAT S8.1
S6.1 and S8.1 have separate headrests for the classic captain seat look. Similar in design and appearance the S6.1 has a flat, long base and the S8.1 has more bolster/side support for a sportier feel.
SEAT S10.1
S10.1 has an innovative design that allows the adjustable armrests to tuck into the backrest of the seat. This then allows the backrest to lay flat forward. The S10.1 benefits from front tilt adjustment.
WATER HEATERKEY FEATURES
- Porcelain-lined steel tank for long life
- Replaceable Anode Rod provides further corrosion protection
- Convenient exterior gas line connection
- One-piece, die-formed metal control
- FAST recovery rate
- Housing protects controls from the weather
- Copolymer insulation jacket specially fitted to the tank to retain heat
Suburban’s line of durable, porcelain-lines steel tank water heaters. Fast recovery heating Universal LP gas-electric models available with features to match the requirements of almost any caravan.
2 & 3 BURNER HOBS
Two & three burner hobs with flush mount glass cover available in black or stainless steel.
